|
A Powerflush is an
efficient way of removing the sludge and dirt that build up
inside your central heating system over time. Without a
Powerflush you could see a gradual reduction in efficiency of
your boiler system as this sludge coats the internal piping and
reduces circulating efficiency.
Most central heating systems develop this
sludge over time, there will be more in older systems. You do
not want to replace and update your boiler with the latest model
without commissioning a Powerflush first. As the sludge and
general dirt are disturbed in the new installation it will find
its way into your new boiler and reduce its effectiveness or
life span.
The
following are some of the problems that could be avoided with a
Powerflush as it removes the Magnetite sludge from your system :
-
-
Cold Radiators
-
Boiler Deposits
-
Heating Pump circulation problems
-
Pipe Blockages
-
Internal Corrosion
-
System blockages
-
Noisy systems
As a result the
benefits of a professionally delivered Powerflush could be :-
-
Increased pump life as your central
heating pump handles clear water instead of sludge
-
Curing radiator cold spots so that the
full surface of the radiator heats your room
-
Improved central heating system
efficiency so reducing fuel costs in future years.
-
Clearing the boiler heat exchanger to
stop banging noises (kettling) and prolonging the boiler
life
-
Reduces Hydrogen gas build up which can
lead to radiator corrosion and reduced heat output
-
Clearing your system of contaminated
water which could lead to internal heating system corrosion.
A Powerflush
machine is used to complete the task. It is connected to your
system and the central heating water is routed through the
machine where it filters out the contaminants. The Powerflush
literally flushes the new liquid through your central heating
system. Once the task is completed then your central heating
system will be refilled adding a corrosion inhibiter to prolong
its operating life.
A
Powerflush needs to be performed by competent engineer and there
will be no mess or complicated installations. The Powerflush
machine connects to your existing piping enabling the task to be
completed rapidly, it can then be de-coupled leaving your
heating system as it was, minus the sludge. As a rule a three
bedroom house with eight radiators would normally take 6 hours
to flush properly.
Your next move is to contact
GB Gas
|
